With the development of the economy, now all kinds of manufacturers are constantly expanding the scale, so in the packaging will also take some machines, but the machine will also have some problems, so do you know what is the reason for the oil temperature rise of the baler？Let's let the small edition of Huayatai packaging machinery explain it to you。
1.Too many hydraulic oil options
Improper choice of hydraulic oil brand, especially viscosity index oil, will directly threaten the normal operation of the hydraulic system。The viscosity planning and viscosity change of hydraulic oil should be as small as possible。The choice of hydraulic oil should also be considered in specific regions and seasons;The oil labeling machine with clear rules should be filled in strict accordance with the rules of the hydraulic oil to be filled。
2.Poor heat dissipation of the packer
Excessive accumulation of dust on the surface of the radiator will lead to heat, poor ventilation and high temperature of the hydraulic tank;The low level and circulating oil system will not work properly, which will lead to high temperature in the system。
3.Hydraulic pump suction
The air inhaled by the hydraulic pump mixes too much with the air in the oil, forming "cavitation", which is accompanied by violent oscillation and noise under high hydraulic shock, and then the temperature rises rapidly。
4.The pressure of the metal baler is improperly adjusted
Setting the system pressure relief valve too high for normal overflow and decompression will lead to an increase in internal leakage, which will lead to an increase in temperature。
5.泄漏
In the process of energy transfer, assuming that the leakage is serious, the volume of the system will increase and lose, and the loss of energy will be converted into the high temperature heat of the system。Assuming the element space is too small, the conflict between the relative movements will also increase the oil temperature。The spacing is too large, and the leakage is serious。
6.Part wear
Severe wear of the hydraulic system components of the baler will cause the system to overheat。Many parts of the components in the system depend on the sealing gap。Once the hydraulic components wear, this will lead to an increase in internal leakage, then the temperature will increase, the viscosity of the oil will decrease, and the internal leakage will further increase, resulting in a further increase in the oil temperature, thus forming a vicious circle。
These are the six reasons why the oil temperature of the baler rises, and I hope it will be helpful to you。
