Business consulting line


  • 1
  • 2
  • 3

Contact us

National hotline:

Company telephone: 0755-27653702
Company fax: 0755-33843753
Enterprise Email:
Address: 2nd Floor, Building A, Guancheng Low-carbon Industrial Park, Hedi North Road, Gongming Town, Guangming New District, Shenzhen

Current Location:Automatic packaging machine - automatic sealing machine - automatic winding machine - heat shrink machine - packaging equipment > About us > Industry information > How to properly maintain the vacuum packaging machine?

How to properly maintain the vacuum packaging machine?

Published by: Hua YataiRelease time: 2020-08-28 15:04点击:
In the packaging industry, the general bottling equipment is completed by the vacuum capping machine。If the bag equipment needs to be vacuumed, it is generally completed with a vacuum packaging machine。So in daily use, how to maintain it?Let's let Hua Yatai's small editor explain it to you。
1. When the vacuum pump is running, the oil level should be 3/4 of the height of the oil window。When the height of the oil window is lower than 1/2, the high-speed vacuum pump should be refueled in time。If the oil level is too high or too low, it will adversely affect the vacuum pump and the motor。Please refer to the vacuum pump instruction manual for specific methods。
2, the machine should be placed horizontally, well ventilated, no corrosive gas or large dust around。
3, the machine needs to be equipped with a grounding protection line, and often check whether the connection point is in good contact to ensure personal safety。
4, before the machine work, the heating time and heating temperature need to be set in the appropriate position, master the principle from low to high。The heat sealing time and temperature should not be set too long or too high at the same time, so as not to burn the electric heating element or the polytetrafluoroethylene sealing linoleum。
5. When the upper cover is pressed down, the vacuum pump starts to work。At this point, if the upper cover is not sucked into place, apply the hand to hold the upper cover (except pneumatic)。
6, the machine makes abnormal noise when working, the vacuum gauge pointer does not move, indicating that the vacuum pump is running in the wrong direction。The phase of the three-phase power supply may not be consistent with the factory phase。It should be closed immediately, otherwise it is easy to damage the vacuum pump。At this time, just replace any two three-phase power supplies (single-phase power supplies do not have this phenomenon).。
7, often check the sealing part of the polytetrafluoroethylene varnished cloth surface whether there is foreign matter, whether smooth, to ensure the quality of the seal。If damaged, replace in time。
8, check whether the screws in each part of the machine are loose, and whether the vacuum chamber is flexible。Appropriate amount of lubricating oil should be injected into moving parts and oil holes。
9. When the machine is working in an emergency, press the emergency stop button and automatically open the boot cover。
10, after the machine is finished running, the main power supply should be cut off。
The above is the correct maintenance of vacuum packaging machine method, I hope to help you。
If there is no special explanation, the articles are original by Huayatai packaging machinery。If you need to reprint, please indicate from
homepage | Vacuum packaging machine | Automatic shrinking machine | Case sealer | labeler | Winding machine | About us | Contact us | sitemap | XML | TXT